33 31 Rear axle support
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE SUPPORT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle carrier to body | R60/R61 | M12 | 100 Nm | |
| 2AZ Cross member to body | R60/R61 | M12 | 100 Nm | |
| 3AZ Cross member to rear axle final drive | R60/R61 | M10 | Replace screws. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
56 Nm 90 ° |
| 4AZ Longitudinal strut to rear axle support/body | R60/R61 | M10 | 65 Nm | |
| 5AZ Vibration absorber (65HZ) to cross member | R60/R61 | M10 | 60 Nm |