61 61 270 Removing and installing (replacing) console for windscreen wiper system complete with electric motor

Necessary preliminary tasks:

Removal:

Unlock and disconnect connector (2).

Release screws (1).

Feed out console for windscreen wiper system (3) from retaining bracket (4) in direction of arrow.

Fig 1: Removing Windscreen Wiper System From Retaining Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in console for windscreen wiper system (3) into retaining bracket (4) in direction of arrow.

Tighten down screws (1).

Tightening torque 61 61 2AZ .

Connect connector (2).

Fig 2: Installing Windscreen Wiper System Into Retaining Bracket

Courtesy of BMW OF NORTH AMERICA, INC.