51 49 003 Removing and installing/replacing cover for rear window frame on left or right

Necessary preliminary tasks:

REMOVAL:

Detach retaining cord (1) for rear storage shelf and release screw (2).

Fig 1: Retaining Cord And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release trim panel (1) from clip (2) and remove.

Installation note:

Replace the faulty clip (2).

Fig 2: Releasing Trim Panel From Clip

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Position trim panel (1).

If required, replace clip (2).

Engage clip (2).

Fig 3: Trim Panel And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screw (2) and attach retaining cord (1) for rear storage shelf.

Fig 4: Retaining Cord And Screw

Courtesy of BMW OF NORTH AMERICA, INC.