51 71 412 Removing and installing/replacing rear spoiler (Cooper & Cooper S)

REMOVAL:

Lever out seal plugs (1) and release screws underneath.

Fig 1: Seal Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip cover (1) on left and right in direction of arrow and remove.

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove rear spoiler (2).

Fig 3: Removing Rear Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Mount rear spoiler (1) in direction of arrow.

Tighten down screws (2).

Tightening torque 51 71 4AZ .

Fig 4: Installing Rear Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

Engage cover (1) on left and right.

Fig 5: Engaging Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screws (1) and mount seal plug.

Tightening torque 51 71 3AZ .

Fig 6: Seal Plugs

Courtesy of BMW OF NORTH AMERICA, INC.