63 21 010 Removing and installing/replacing complete rear fog light (Cooper JCW)

Removal:

Release screws (1).

Slightly pull bumper panel (2) towards rear.

Fig 1: Bumper Panel And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock latch mechanisms (1).

Feed out rear fog light (2) towards rear.

Fig 2: Rear Fog Light And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect the connector (1).

Remove rear fog light (2).

Fig 3: Rear Fog Light And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining tabs on the rear fog light (1) must not be missing or damaged.

Fig 4: Rear Fog Light And Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the connector (1).

Feed in rear fog light (2).

Fig 5: Rear Fog Light And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Ensure rear fog light (2) is properly latched (1).

Fig 6: Rear Fog Light And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten bumper panel (2) with screws (1).

Fig 7: Bumper Panel And Screws

Courtesy of BMW OF NORTH AMERICA, INC.