66 53 020 Removing and installing (replacing) reversing camera

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Removal:

Release screws (1).

Remove rear view camera (2) from tailgate handle strip (3).

Fig 1: Locating Reversing Camera Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert rear view camera (2) correctly into tailgate handle strip (3).

Tighten down screws (1).

Fig 2: Locating Reversing Camera Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Replacement: