52 26 311 Removing and installing/replacing lock for left or right rear seat backrest

IMPORTANT:

Removal:

Unclamp cover (1) and remove.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release welt in area (1).

Fig 2: Welt Releasing Area

Courtesy of BMW OF NORTH AMERICA, INC.

Press seat cover and upholstery slightly to one side.

Unclip cover (1) by releasing latch mechanisms (2) and remove.

Fig 3: Latch Mechanisms And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove the lock (2).

Fig 4: Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position lock (2).

Tighten down screws (1).

Tightening torque 52 26 1AZ .

Fig 5: Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in cover (1).

Ensure that latch mechanisms (2) correctly engage.

Fig 6: Latch Mechanisms And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Secure welt in area (1).

Fig 7: Welt Releasing Area

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in cover (1).

Fig 8: Installing Cover

Courtesy of BMW OF NORTH AMERICA, INC.