63 31 150 Removing and installing/replacing glovebox light

Removal: 

Pry glove box light (1) out of glove box (2).

Disconnect associated connector and remove glove box light (1).

Fig 1: Glove Box And Glove Box Light

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, remount BULB 
• Note BULB TYPE .

Installation: 

Connect associated connector.

Join glove box light (1) in glove box (2).

Fig 2: Glove Box And Glove Box Light

Courtesy of BMW OF NORTH AMERICA, INC.