62 30 005 Removing and installing/replacing trim for Head Up Display

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Removal:

Release cover for head-up display (1) from retaining clips with special tool 00 9 325 .

Feed out cover for head-up display (1) from instrument panel trim (2) and remove.

Fig 1: Removing Cover For Head-Up Display From Retaining Clips Using Special Tool 00 9 325

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining clips an cover for head-up display (1) must not be missing or damaged.

Fig 2: Locating Head-Up Display Cover Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Join cover for head-up display (1) to instrument panel trim (2) and clip in.

NOTE: Ensure cover for head-up display (1) is correctly fitted and engaged on instrument panel trim (2).

Fig 3: Removing Cover For Head-Up Display From Retaining Clips Using Special Tool 00 9 325

Courtesy of BMW OF NORTH AMERICA, INC.