11 25 Piston with rings and bolts - general
PISTON WITH RINGS AND BOLTS SPECIFICATION
| B38 (1.5L) Piston and pin are paired to each other - replace together only. |
||
| Piston diameter at measuring point "A" | mm | 10 |
| Original (new dimension) | mm | 81.95... 81.97 |
| Repair stage (new dimension) | mm | % |
| Oversize (new dimension) | mm | % |
| Piston installation clearance (piston new) | mm | 0.03...0.17 |
| Piston installation clearance (piston worn) | mm | 0.03...0.20 |
| Permissible total wear tolerance between piston and cylinder (engine operated) |
mm | 0.25 |