18 30 Exhaust System
TIGHTENING TORQUE SPECIFICATION (EXHAUST SYSTEM)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Catalytic converter to exhaust turbocharger | B36/B38/B46/B48 | V-band clamp | Replace gasket and V band clamp. | 13 Nm |
| 2AZ Catalytic converter to holder | B36/B38/B46/B48 | M8 nut | 19 Nm | |
| 3AZ Heat shield/catalytic converter holder to cylinder head | B36/B38/B46/B48 | M8x20 | 19 Nm | |
| 4AZ Reinforcement brace | B36/B38/B46/B48 | M8x16 | 19 Nm | |
| 5AZ Heat shield to cylinder head | B36/B38/B46/B48 | M8x20 | 19 Nm | |
| 6AZ Heat protection plate | B36/B38/B46/B48 | M6x16 | 8 Nm | |
| 7AZ Front reinforcement strut | B36/B38/B46/B48 | M10x18 | 56 Nm |