Removing And Installing/Replacing The Left Hood Hinge (Hood Removed) (Cooper, Cooper S, John Cooper Works)

IMPORTANT: These instructions apply only to vehicles without active pedestrian protection!
Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION! .

For stripping and rebuilding operations, refer to surrounding texts on KSD (FRU number 41 61 563).

Necessary preliminary work

Remove. Refer to REMOVING AND INSTALLING/REPLACING THE WINDSHIELD PANEL COVER, LEFT or REMOVING AND INSTALLING/REPLACING THE WINDSHIELD PANEL COVER, RIGHT left windshield panel cover.

Removal

Remove water drain channel (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove hinge.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation

Install hinge and tighten screws (1).

Tightening torque 41 61 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Install the water drain channel (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

INSTALL left windshield panel cover.
ADJUST hinge together with engine compartment lid.