LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2016 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body Equipment - Repair (F57) >> 51 47 Floor-Trunk-Engine Compartment-Trim Panel >> Removing and installing/replacing underbody protection (front) (Cooper Convertible)

Removing and installing/replacing underbody protection (front) (Cooper Convertible)

Removal  :

Unscrew all bolts.

Fold and remove front underbody protection (1).

G13797785Courtesy of BMW OF NORTH AMERICA, INC.

Installation  :

Insert rear underbody protection (1) and place on screw points.

Tighten down all screws.

Tightening torque 51 71 5AZ .

G13797785Courtesy of BMW OF NORTH AMERICA, INC.