REP-TAT-P-5434-01 Removing the safety catch

Preliminary work 

• Remove the INTERIOR TRIM  of the guide rail

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).
• Remove the centering tip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach the sleeve (1) from the centering tip (2).
• Twist the centering tip (2) towards the bottom to relieve the tension of the spring.
• Remove the centering tip (2) towards the inside in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.