REP-TAT-P-5218-01 Removing backrest frame
Preliminary work
Remove FRONT SEAT
Remove INNER COVER
Remove the COVER for backrest adjustment
Remove the STEERING LEVER for backrest adjustment
Remove the LEVER for seat height adjustment
Remove the OUTER COVER on the front seat
Remove the THIGH SUPPORT on the front seat
Remove SEAT COVER WITH CUSHION
Remove the SEAT FRAME
Remove FRONT SEAT
Remove TRIM for backrest release
Remove the REAR PANEL from the front seat backrest
Remove the TRIM at the bottom of the aperture
Remove SIDE AIRBAG from front seat
Remove the BACKREST COVER with the cushion
When replacing the backrest frame: REMOUNT COMPONENTS
When replacing the seat frame: REMOUNT COMPONENTS
- F56/57:
Detach cable linkage (1) from the holders (2) and (3).
- Shift the rear seat backrest into an upright position.
- Loosen screws (4).
- Completely remove the backrest frame (5) to the top.
If necessary, feed out the relative cable and set aside rear seat backrest.