REP-TAT-P-5218-02 Install the trim at the bottom of the aperture

• Correctly position the trim (1) in the trim (3) and engage in the detents (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the clip (1).
• Position the seat cover (2) as shown.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the seat cover (1) in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work 

Install the TRIM  at the bottom of the aperture

Install the REAR PANEL  from the front seat backrest