LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2015 >> Cooper S, 2D Convertible, 1.6L Eng, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Body Equipment - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52)) >> Rear Bumper >> 51 12 050 Removing and installing/replacing carrier for rear bumper trim

51 12 050 Removing and installing/replacing carrier for rear bumper trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

Release bolts (1) and nut (2) on left/right.

Tightening torque, refer to 51 12 1AZ in BODY EQUIPMENT - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Remove carrier.

Fig 1: Locating Rear Bumper Carrier Retaining Bolts
G03306590Courtesy of BMW OF NORTH AMERICA, INC.