51 36 060 Removing and installing/replacing finisher - rear quarter glass - front

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not use excessive force or lever.

Using a sharp scraper (as shown), remove finisher.

Fig 1: Removing Finisher Using Scraper

Courtesy of BMW OF NORTH AMERICA, INC.

Install hint:

Clean glass and finisher to remove all adhesive residue.

Apply new adhesive tape to finisher and secure to glass.

Ensure rear quarter glass lower finisher is located behind the front finisher (as shown).

Fig 2: View Of Rear Quarter Glass Lower Finisher

Courtesy of BMW OF NORTH AMERICA, INC.