11 36 Variable camshaft control
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1 AZ | VANOS to inlet and exhaust camshafts | N18 | M10 x 1 x 52 | Replace screw. | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 2 AZ | Non-return valve VANOS to cylinder head | N18 | M14 x 1.5 | Replace sealing ring. | 13 Nm |
| 3 AZ | Solenoid valve holder to crankcase | N18 | M6 x 16 | 9 Nm | |