11 65 Turbocharger and control

TIGHTENING TORQUE SPECIFICATION - TURBOCHARGER AND CONTROL

		Type	Thread	Tightening specifications	Dimension
1 AZ	Exhaust turbocharger to exhaust manifold	N18	M8 nut		20 Nm
2 AZ	Stud bolts to exhaust manifold	N18	M8		15 Nm
3 AZ	Holder to exhaust turbocharger	N18	M8		25 Nm
4 AZ	Oil feed line to exhaust turbocharger	N18	Banjo bolt M12 x 1.5	Replace all seals	30 Nm
5 AZ	Oil return line to exhaust turbocharger	N18	M6 x 18	Replace all seals	8 Nm
6 AZ	Holder to crankcase	N18	M8		19 Nm
7 AZ	Front heat shield to rear heat shield	N18	M6 x 20		4 Nm
8 AZ	Vacuum container	N18	M8		19 Nm
9 AZ	Delivery and return coolant lines to exhaust turbocharger	N18	Hollow bolt	Replace all seals	35 Nm