11 53 Thermostat and Connections
TIGHTENING TORQUE SPECIFICATION - THERMOSTAT AND CONNECTIONS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Thermostat housing to cylinder head | N14 | M6 | 8 Nm | |
| 2AZ | Vapor separator to crankcase | N14 | M6x100 | 8 Nm | |
| 3AZ | Auxiliary water pump | N14/N18 | M6 | 8 Nm | |
| 4AZ | Banjo bolt for feed and reverse on exhaust turbocharger | N14 | M14x1.5 | Replace sealing ring. | 35 Nm |