11 41 Oil pump with strainer and motor
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1 AZ | Oil pump to bedplate | N16, N18 | M8x28 | 25 Nm | |
| 2 AZ | Sprocket to oil pump | N16, N18 | M8x35 | Replace screw. | |
| Jointing torque | 5 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3 AZ | Oil pump cable clip | N16, N18 | M5x12 | 4 Nm | |
| 4AZ | Solenoid valve to oil pump | N16, N18 | M6x20 | 8 Nm | |
| 5AZ | Locking panel on counter support | N16, N18 | M5x12 | 4 Nm | |