11 12 Cylinder Head And Cylinder Head Cover
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Cylinder head bolts | N14 | M8x95 | Replace screws | |
| Jointing torque | 15 Nm | ||||
| 1st angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 90 ° | ||||
| 2AZ | Cylinder head bolts | N14 | M10x145 | Replace screws | |
| Jointing torque | 30 Nm | ||||
| 1st angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 90 ° | ||||
| 3AZ | Cylinder head bolts | N14 | M8x35 | Replace screws | 30 Nm |
| 4AZ | Cylinder head cover to cylinder head | N14 | M6x30 | 10 Nm | |
| 5AZ | Ground cable to cylinder head cover | N14 | M5 | 10 Nm | |
| 6AZ | Inlet camshaft bearing cap to cylinder head | N14 | M6 | 10 Nm | |
| 7AZ | Exhaust camshaft bearing cap to cylinder head | N14 | M6 | 10 Nm | |
| 8AZ | Lifting lug to cylinder head | N14 | M8x20 M8x25 |
20 Nm | |
| 9AZ | Acoustic cover to cylinder head cover | N14 | M6x40 | 8.5 Nm | |