1131 Camshaft
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Guide rail, crankcase | N14 | M8x1.25 | Replace sealing ring | 24 Nm |
| 2AZ | Guide rail to cylinder head | N14 | M14x1.5 | Replace sealing ring | 20 Nm |
| 3AZ | Line to cylinder head | N14 | M 6x20 | 8 Nm | |
| 4AZ | Chain tensioner to cylinder head | N14 | M22x1.5 | Do not retighten the chain tensioner. Replace sealing ring |
80 Nm |