31 11 Front axle support
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT AXLE SUPPORT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support, middle, to body | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 2AZ Rear end of front axle support to body | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 3AZ Holder, front bumper, to front axle support | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 4AZ Holder, wishbone rubber mount, to front axle support | R55/R56/R57/R58/R59/R60/R61 | M14 | 165 Nm | |
| 5AZ Holder, wishbone rubber mount, to body | R55/R56/R57/R58/R59/R60/R61 | M10 | Replace screws. | |
| Jointing torque | 59 Nm | |||
| Angle of rotation | 90 ° | |||
| 6AZ Strut front/rear on front axle support | R60/R61 | M14 | 175 Nm |