52 13... Removing and installing protective plate for front seat (without rear panel)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Lever out pin (1) and remove expanding rivet.

Installation:

If necessary, replace faulty expanding rivet.

Fig 1: Identifying Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out welt from backrest cover in marked area.

Fig 2: Levering Out Welt From Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Open zip fasteners on left and right.

Fig 3: Locating Zip Fasteners

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip protective plate from backrest frame.

Installation:

Make sure protective plate is correctly fitted.

Fig 4: Identifying Protective Plate Clips

Courtesy of BMW OF NORTH AMERICA, INC.