65 77 532 Removing and installing/replacing front left acceleration sensor (US version only)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove WHEEL ARCH COVER at front

Disconnect plug connection (1).

Release screws (2) and remove acceleration sensor (3).

Installation note:

Replace screws (2).

Tightening torque 65 77 4AZ .

Fig 1: Identifying Plug Connection, Screws And Acceleration Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The installation position of the acceleration sensor has been changed on vehicles built after 08/2010:

(1) Installation position before 08/2010

(3) Installation position after 08/2010

The acceleration sensor (3) is positioned slightly offset on the other side of support (2).

Fig 2: Installation Position Of Acceleration Sensor With Support

Courtesy of BMW OF NORTH AMERICA, INC.