61 31 241 Removing and installing/replacing bonnet/hood contact switch

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Graphic shows the R56 by way of example, deviations in detail are possible in other models.

Disconnect plug connection (1).

Release latch mechanisms (2) with a suitable tool.

Remove engine compartment lid contact switch (3) from bracket (4) in direction of arrow.

Fig 1: Removing Engine Compartment Lid Contact Switch From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Ensure engine compartment lid contact switch (3) is correctly seated in bracket (4).