LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2015 >> Cooper Countryman Base, 1.6L Eng, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (General Electrical System - Repair (R61) -- Cooper Paceman) >> Plug Connections, Terminals, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline connectors, 15-pin, System D2.5

61 13... Inline connectors, 15-pin, System D2.5

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling Apart External Connector
G08509669Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector Up to Limit Position
G08509670Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook(4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Retaining Hook Using Special Tool (61 0 303)
G08509671Courtesy of BMW OF NORTH AMERICA, INC.