61 13 055 Removing and installing (replacing) fuse box for engine compartment

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD

Unlock latch mechanisms (1) and remove fuse box cover (2).

Fig 1: Identifying Engine Compartment Fuse Box Cover And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove terminal shoe. Tightening torque 61 13 4AZ .

Unfasten screws (2). Tightening torque 61 13 1AZ .

Raise the fuse box.

Fig 2: Identifying Fuse Box Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective cap (1).

Fig 3: Removing Fuse Box Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all plug connections (1) from the bottom of the fuse box.

Replacement:

Modify the fuses and relay

Fig 4: Identifying Fuse Box Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.