61 14 030 Removing and installing/replacing B+ multifuse distributor

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT COWL PANEL COVER
Disconnect NEGATIVE BATTERY CABLE

NOTE: Battery shown removed for purposes of clarity.

Pull B+ distributor (1) in direction of arrow out of bracket (2).

Fig 1: Pulling B+ Distributor Out Of Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure B+ distributor (1) is correctly engaged on bracket (2).

Unlock catches (1) with a suitable tool and remove B+ distributor lid (2) towards rear from B+ distributor (3).

Installation note:

Make sure B+ distributor lid (2) is correctly seated on B+ distributor (3).

Fig 2: Identifying Catches, B+ Distributor And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1). Tightening torque 61 14 1AZ .

Disconnect plug connections (2) and remove B+ distributor (3).

Installation note:

Connectors are color- and mechanically coded.

Ensure correct contacting.

B+ distributor can only be replaced as a complete unit (with fuses).

Fig 3: Identifying Plug Connections, Nut And B+ Distributor

Courtesy of BMW OF NORTH AMERICA, INC.