61 34... Removing and installing/replacing the power socket in the front cup holder

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT CUP HOLDER

NOTE: Power socket is shown removed for purposes of clarity.

Release the latch mechanisms (1) using a suitable tool and press the power socket (2) out of the front cup holder.

Installation note:

Fig 1: Identifying Power Socket And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Latch mechanisms (1) on power socket (2) must not be damaged.

Make sure that power socket (2) is correctly fitted in the cup holder.

Release latch mechanisms (1) using a suitable tool and slide power socket (2) in the direction of arrow out of the illuminated ring (3).

Installation note:

Latch mechanisms (1) on illuminated ring (3) must not be damaged.

Make sure power socket (2) is fitted correctly in illuminated ring (3).

Fig 2: Removing Socket Out Of Socket Receptacle

Courtesy of BMW OF NORTH AMERICA, INC.