11 65 Turbocharger and control

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - TURBOCHARGER AND CONTROL

	Type	Thread	Tightening specifications	Dimension
1 Exhaust turbocharger to AZ exhaust manifold	N18	M8 nut		20 Nm
2 Stud bolts to exhaust AZ manifold	N18	M8		15 Nm
3 Holder to exhaust AZ turbocharger	N18	M8		25 Nm
4 Oil feed line to exhaust AZ turbocharger	N18	Banjo bolt M12 x 1.5	Replace all seals	30 Nm
5 Oil return line to exhaust AZ turbocharger	N18	M6 x 18	Replace all seals	8 Nm
6 AZ Holder to crankcase	N18	M8		19 Nm
7 Front heat shield to rear AZ heat shield	N18	M6 x 20		4 Nm
8 AZ Vacuum container	N18	M8		19 Nm
9 Delivery and return AZ coolant lines to exhaust turbocharger	N18	Hollow bolt	Replace all seals	35 Nm