11 11 Engine block
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1 Main bearing screws, AZ observe tightening specification. |
N18 | M9x115 | Replace screws. | |
| Jointing torque | 30 Nm | |||
| Angle of rotation | 150 ° | |||
| 2 Bedplate, observe AZ tightening specification. |
N18 | M6x35/M6x55 | Replace screws. | |
| Jointing torque | 9 Nm | |||
| 3 Screw plug, gear case AZ upper section. | N18 | M22x1.5 | 35 Nm | |
| 4 Screw plug, gear case AZ lower section. | N18 | M16x1.5 | Replace seal. | 32 Nm |
| 5 Oil spray nozzle to AZ crankcase. | N18 | M10 | 20 Nm | |
| 6 Air conditioning AZ compressor fixing. | N18 | M8 | 8 Nm | |
| 7 Retaining bolt (catalytic AZ converter) to crankcase. | N18 | M8 | Bolt | 10 Nm |