11 11 Engine block
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Main bearing screws, observe tightening specification. | N16 | M9x115 | Replace screws. | |
| Jointing torque | 30 Nm | |||
| Angle of rotation | 150 ° | |||
| 2AZ Bedplate, observe tightening specification. | N16 | M6x35/M6x55 | Replace screws. | |
| Jointing torque | 9 Nm | |||
| 3AZ Screw plug, gear case upper section. | N16 | M22x1.5 | 35 Nm | |
| 4AZ Screw plug, gear case lower section. | N16 | M16x1.5 | Replace seal. | 32 Nm |
| 5AZ Oil spray nozzle to crankcase. | N16 | M10 | 20 Nm | |
| 6AZ Air conditioning compressor fixing. | N16 | M8 | 8 Nm | |
| 7AZ Retaining bolt (catalytic converter) to crankcase. | N16 | M8 | Bolt | 10 Nm |