11 12 Cylinder head with lid
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolts 10.9 | N16 | M8x95 | Replace screws. | |
| Jointing torque | 15 Nm | |||
| 1. Angle of rotation | 90 ° | |||
| 2. Angle of rotation | 90 ° | |||
| 2AZ Cylinder head bolts | N16 | M10x145 | Replace screws. | |
| Jointing torque | 30 Nm | |||
| 1. Angle of rotation | 90 ° | |||
| 2. Angle of rotation | 90 ° | |||
| 3AZ Cylinder head bolts | N16 | M8x35 | Replace screws. | 30 Nm |
| 4AZ Cylinder head cover to cylinder head | N16 | M6x30 | 10 Nm | |
| 5AZ Earth cable to cylinder head cover | N16 | M6/M5 | 10 Nm | |
| 6AZ Bearing support of eccentric shaft to cylinder head | N16 | M6x40 M6x70 |
10 Nm | |
| 7AZ Intake camshaft bearing cap to bearing support | N16 | M6x3 | 10 Nm | |
| 8AZ Exhaust camshaft bearing cap to cylinder head | N16 | M6x40 | 10 Nm | |
| 9AZ Lifting eye to cylinder head | N16 | M8x20 M8x25 |
20 Nm | |
| 10AZ VVT sensor to cylinder head | N16 | M6x40 | 10 Nm | |
| 11AZ Acoustic cover to cylinder head cover | N16 | M6x40 | 8.5 Nm |