21 00 006 Bleeding clutch hydraulic system

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Connect bleeder unit to brake fluid expansion tank.

IMPORTANT: Check relevant equipment manufacturer's operating instructions for each device.
Charging pressure should not exceed 2 bar.

Remove dust cap from vent valve.

Connect vent hose to vent valve (1).

Fig 1: Identifying Vent Valve

Courtesy of BMW OF NORTH AMERICA, INC.

Open vent valve (1) and flush until clear brake fluid emerges without air bubbles.

Close vent valve.

Switch off bleeder unit or remove from expansion tank.

Correct brake fluid level in expansion tank.

Fig 2: Opening Vent Valve

Courtesy of BMW OF NORTH AMERICA, INC.