37 14 511 Replacing front ride-height sensor

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe SAFETY INSTRUCTIONS for raising the vehicle

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Undo nut (1) from link at ride-height sensor.

Installation note:

Replace self-locking nut.

Fig 1: Identifying Ride-Height Sensor Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Move sensor lever upward.

Undo screws (1), release plug connection (2) and disconnect.

Fig 2: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Check HEADLIGHT SETTING , correct if necessary