25 16 065 Replacing gaiter (selector lever cover) for gearshift bracket

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove GRIP

Detach trim cover (1) in upward direction.

Fig 1: Detaching Trim Cover

G11010533

Courtesy of BMW OF NORTH AMERICA, INC.

Use suitable tool to release gaiter retainers (1).

Pull off gaiter upwards.

Fig 2: Releasing Gaiter Retainers Using Suitable Tool

G11010534

Courtesy of BMW OF NORTH AMERICA, INC.

Release plug connection (1) on holder and disconnect.

Remove gaiter (2).

Fig 3: Identifying Gaiter And Plug Connection

G11010535

Courtesy of BMW OF NORTH AMERICA, INC.

Release retainers and remove trim cover (1).

Fig 4: Removing Trim Cover

G11010536

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) in direction of arrow and feed out wiring harness (2) with display.

Fig 5: Removing Cover

G11010537

Courtesy of BMW OF NORTH AMERICA, INC.