67 62 000 Removing and installing or replacing flat motor for front left or right power window regulator

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove POWER WINDOW UNIT IN FRONT DOOR

Release screws at marked points.

Remove flat motor (1).

Fig 1: Identifying Power Window Regulator Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Run a function check.

Flat motor does not have to be initialized.