26 11 Propeller Shaft. complete
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - PROPELLER SHAFT, COMPLETE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Propeller shaft plugged into transfer box PTO (insert nut) | R60 ALL | Torque | 75 Nm | |
| 2AZ Rear flexible disc to rear axle final drive | R60 ALL | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| Jointing torque | 25 Nm | |||
| Angle of rotation | 60° + 10° | |||
| 3AZ Flexible disc, rear, to propeller shaft | R60 ALL | Replace bolts and nuts Jointing torque and angle of rotation must be observed without fail | ||
| Jointing torque | 43 Nm | |||
| Angle of rotation | 60° | |||
| 4AZ Centre mount to body | R60 ALL | 21 Nm | ||
| 5AZ Front propeller shaft to rear propeller shaft | R60 ALL | 60 Nm |