64 11 221 Replacing resistor for heating and air conditioning unit blower (IHR/IHKR)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and feed out cover (2) towards bottom.

Fig 1: Identifying Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retaining lug (1).

Pull the resistor (2) in direction of arrow out of the guide.

Fig 2: Removing Heating And Air Conditioning Unit Blower Resistor

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Take off resistor (2).

Fig 3: Identifying Resistor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.