31 00... Notes on repairing threads

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine support may be repaired with Helicoil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Damaged Helicoil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Core Hole
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert

Fig 3: Drilling Thread For Helicoil Thread Insert
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the table and screw into the locating thread until flush with the original thread

Fig 4: Inserting Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Removing Drive Pin

Courtesy of BMW OF NORTH AMERICA, INC.