13 71 000 Removing and installing the intake silencer housing (N16)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Switch off ignition.
Loosen screws and pull off the intake silencer housing (1) from the bearing journal.
Tightening torque 13 71 2AZ .
Pull the intake port (2) off the intake silencer housing (1) and remove the intake silencer housing.
Unlock the intake silencer housing with rotational movement from the resonance body.
Installation note:
Make sure intake silencer housing rubber mounts and bearing journal are correctly seated.