34 52 550 Removing and installing/replacing DSC angular rate sensor (DSC sensor)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove COMBOX COVER .
Disconnect plug connection (1).
IMPORTANT:
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Release nuts (2) and remove DSC sensor.
Installation note:
Tightening torque 34 51 5AZ .