34 52 535 Replacing a rear pulse sensor

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove WHEEL .

Release screw (1) and remove pulse sensor.

Unclip cable from brackets (2).

Installation note:

Tightening torque 34 51 4AZ .

Clean bore hole for pulse sensor and grease with Staburags NBU 12/K lubricating grease.

Fig 1: Identifying Pulse Sensor Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Installation note:

Make sure plug connection engages correctly.

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.