32 00... Test conditions for chassis/wheel alignment check
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Only BMW approved wheel and tire combinations are installed on the vehicle.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire pressure (see label on vehicle).
- All chassis and suspension components must be technically OK.
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.