51 34 420 Removing and installing/replacing cover on window frame (B-pillar) of rear door, left or right

Feed out rubber window seal (2) in area of cover on window frame (1) toward the top.

Installation note: 

To facilitate installation, moisten rubber window seal (1) slightly with water.

Fig 1: Identifying Rubber Window Seal And Window Frame Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) from window frame cover (1).

Tightening torque 51 35 1AZ .

Fig 2: Identifying Window Frame Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out window frame cover (1) toward the top.

Installation note: 

Feed in cover (1) correctly on window frame at bottom.

Fig 3: Installing Cover

Courtesy of BMW OF NORTH AMERICA, INC.