51 37 000 Removing and installing/replacing complete rear left or right power window regulator

Necessary preliminary tasks:

Electrically move door window (1) until door window (1) can be unlocked from bracket via opening (2).

Press the brackets toward the outside with a suitable tool and feed out the door window glass (1) upwards out of bracket.

Fig 1: Unlocking Window Via Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Slide door window glass (1) fully upwards and fix in the window frame with adhesive tape (2).

Fig 2: Identifying Door Window Glass And Adhesive Tape

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect plug connection (2) at flat motor (1).

Unscrew nuts (3).

Tightening torque 51 35 4AZ .

Feed out power window regulator (1) from inner door panel.

Fig 3: Identifying Power Window Regulator And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement