61 31 029 Removing and installing/replacing roof operating facility

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Lever out the cover (1) from the roof operating facility.

If necessary, disconnect the microphone plug connection and remove the cover (1).

Fig 1: Levering Out Cover From Roof Operating Facility

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Unlock latch mechanisms (2).

Lower the roof operating facility (3).

Disconnect the associated plug connections and remove the roof operating facility (3).

Replacement:

Fig 2: Identifying Screws, Latch Mechanisms And Roof Operating Facility

Courtesy of BMW OF NORTH AMERICA, INC.